Так как с официального сайта модели убрали, выкладываю зеркало у нас (то, что было на сайте Одина 26 августа 2016). Нужно скачать 4 модели, напечатать их. Для сборки понадобится ещё прокладка, винтики, гайки и пружина (список в конце).
The M12 Sidewinder has been designed for use with M4 type AEG magazines. Not wanting to leave anyone out in the cold we are developing adapters for a wide variety of different magazines. We want everyone to be able to use the M12 Sidewinder so we are making the adapter files available for FREE. Simply download the files for the adapter components you are interested in and 3D print or have someone else print the main components. The adapters may use screws, nuts, pins, O-rings, and springs for the assembly and those components will need to be purchased separately. The files will have overhanging sections and every printer is a little different so there will need to be some removal of support, clean up, filing and assembly.
We are continuing to develop different adapters and will be adding them to the website as they are finalized. If you do not see the adapter you are interested in please feel free to contact us and inquire about our schedule. If we receive more interest in certain magazines we may move them up the list.
For every adapter we design we need to have a magazine on hand to measure and test with. If you are interested in an adapter that we are not currently working on, one option would be to consider sending us one of your magazines. Upon receiving your magazine we will design an adapter for it and ship the magazine back to you with a free 3D printed adapter. You will be asked to pay for shipping both ways. If this is something you are interested in please contact us at email@example.com
or by clicking the link. Contact us.
It is suggested that all components are printed in ABS at .1-.15 layer height with supports everywhere turned on. The Nozzle should be printed on its side for strength with the small flat facing down. The sides should be printed with the outside down and the BB track up.
M2x6mm O-ring выглядит так:
0.235" OD, .025" Wire Torsion Spring выглядит так:
Флудить, так флудить... © Cortess
Еще одна тусовка офисных рембо, охраняющих свою фаллометрическую песочницу © Cobalt
Пейнтбол и околопейнтбольное общение довольно тонкая материя © Werter